Use with ANL Fuse Blocks for many applications with 35-750 Amp loads.Approved for use aboard gas-powered boats. Ignition protected when used in Blue Sea Systems' fuse blocks. 50-300A fuses use 5003. Tin-plated blades connect to 5/16" studs. Blown condition is visible through window. 5000A interrupt capacity. Max 32V DC.6,000 Amp Interrupt Rating satisfies ABYC requirements for main DC circuit protection on large battery banksSilver-plated connector blades for corrosion resistanceVisible indication of blown fuse conditionIgnition protected (conforming to SAE J1171)-safe for installation aboard gasoline powered boats (35-500 Amp only)For use with Blue Sea Systems' ANL Fuse BlocksSold individuallySpecificationsApprovals: Meets ISO 8846 Marine, SAE J1171 Marine for ignition protectionIgnition Protected:Yes Devices, which operate in a potentially explosive environment, must be ignition protected. This would include engine rooms with gasoline engines. There is a very specific set of tests which a device must pass to claim ignition protection. They include operating safely in an explosive mixture of propane and air. Maximum Voltage:32V DCInterrupt Capacity, The fault current that a device, normally a fuse or circuit breaker is capable of breaking without damage:6000A @ 32V DCWeight:0.05lb (0.02 kg)Dimensional DrawingBlow Delay Curve